Geo-Fix All Weather Paving Joint Compound | Permament Joint Filler for Dry and Wet Conditions with Hydrophobic Characteristics - Grey - 20 kg

Product Information

Deeper joints can be part filled with dry sand or other dry materials, to the required minimum depth. Carefully sweep off any excess with a soft brush ensuring that the material is swept at a 450 angle to the joints. The job was done quickly once the vacuum sealed bag was opened – a must as it starts to set when the air gets to it, so you only have 45 minutes to complete while the geo-fix is still workable.

Geo-Fix Original | Geo-Fix - FatStack Geo-Fix Original | Geo-Fix - FatStack

To ensure a perfect joint, press the Geo Fix Paving Joint Compound into the joints with a pointing tool or compact into joints using a vibrating plate.hours later it is set hard but is still water permeable so you won’t get standing water on your patio when it rains. Geo-Fix® Original is ready mixed and can simply be brushed into joints with minimal effort compared to using traditional mortar. The warmer the temperature the quicker the compound cures, the compound is even suitable for use in temperatures below freezing point providing it is kept dry until it is fully cured. As the company cannot be aware of all the applications and materials the product may be used on, it is the user’s responsibility to determine suitability for use.

Application | Geo-Fix - FatStack Application | Geo-Fix - FatStack

Geo-Fix® Original is easily finished by compacting with a pointing tool saving valuable time compared to traditional wet pointing. The technical storage or access is strictly necessary for the legitimate purpose of enabling the use of a specific service explicitly requested by the subscriber or user, or for the sole purpose of carrying out the transmission of a communication over an electronic communications network.

Geo-Fix® All Weather forms a solid joint that resists weed and plant growth yet is water permeable, allowing water to escape to prevent ponding. Geo-Fix® All Weather is ready to use single component self setting permanent joint filler for use in both dry and wet conditions having hydrophobic characteristics.

Geo-Fix Original Method | Geo-Fix - FatStack Geo-Fix Original Method | Geo-Fix - FatStack

In areas subject to vehicular traffic it is essential that the paving elements are bedded on a class 1 mortar and a high percentage of the mortar is squeezed up the joint, thereby providing support for the paving elements. Geo-Fix® All Weather is a ready to use single component self setting joint filler suitable for use in both dry and wet conditions having hydrophobic properties. Geo Fix is supplied ready to use and does not require any further mixing or addition of other materials. Geo-Fix®All Weather is easily finished by compacting with a pointing tool saving valuable time compared to traditional wet pointing.

Using a soft brush, push the Geo-Fix All Weather Jointing Compound into the joints ensuring that they are filled with the compound. The excellent flexural properties of Geo-Fix® All Weather make it an ideal compound for jointing paving elements.